Visit  us at World Ag Expo 2010 in Tulare, CA, February 9th thru 11th, 2010.

Ag-Expo-2000

ADDITIONAL  CONTENT AREAS ARE UNDER DEVELOPMENT

 

 

WILCOX AGRI-PRODUCTS FINISHING CHISELS - 3 Point & Pull Types

Finishing-Chisel---3-point

Pull type Finishing Chisel with Finishing Chisel Reel

Finishing-Chisel-Reel

The superior tillage dynamics of the Wilcox  Finishing Chisel Reel can provide a better than field cultivator finish from a chisel plow.

Floating-Hitch-Finishing-Chisel

Floating Hitch, Folding Pull Type Chisel

Finishing-Chisel-Fold-Up-Reel

The ability to fold up the reel out of the working position allows for a coarse aerating chisel plow effect from the same implement that provides a well-finished seed bed.

  Features   | Options    |  Finishing Chisel Reel   

 

 

APPLICATIONS

The Wilcox Finishing Chisel picks up where spring loaded chisel plows leave off.  While the finishing chisel shanks are sheer protected, the breakout is typically 2-3 times that of spring loaded shanks.  Many western soils will trip or force spring shanks to pivot upward before the chisel has achieved the desired depth. 

The rigid shank apply the maximum amounts of fracturing force to the ground not limited by a particular spring rake.  In other words, a spring shank can only penetrate ground softer than the spring rake, thus skimming over the compacted areas.  A continued practice of skimming only increases the degree of compaction as well as the ever-increasing area compacted. 

The use of rigid shanks not only insures desired depth usually beyond that afforded with spring shanks but there are no moving parts and maintenance is not an issue.  All horsepower dynamcis are transfered to fracturing the soil around the shank rather than collapsing a spring. Bolts, bushing pins and springs are not used as the shanks are fixed in a similar manor as the larger sub soiler models.

Choose from multiple modes and configurations, ranging from 3 PT to Pull Type, Rigid to Folding, both with Flex Wing and Rigid Wing mechanisms.  Many units are also available with the Wilcox Finishing Chisel Reel Assembly in either or both mechanical or hydraulic down pressure kits.

 

 

 

 

FEATURES

  • 2, 3 & 4 bar configuration
  • 1-1/4” x 30 (3.18 x 76 cm) Alloy Shanks
  • Reversible points
  • Sweeps on most models
  • Depth from 5” to 20” (12 to 50 cm)
  • Rigid shanks with sheer protection
  • Heavy wall tubing frames
  • Mechanical or hydraulic reels
  • Folding Flex wings and Rigid wings
  • 31 ft & 37 ft models available in floating tongue
  • One touch depth control

 

 

OPTIONS

  • Hard faced and Chrome points
  • Sweeps
  • 3 PT units available with dual steel wheels or rubber tires with 6,500 lb, 8 hole hub and spindles
  • Rear hitch

 

 

REEL ASSEMBLY: 

Designed to aid several extra dynamics to the already superior chisel plowing effects of the Wilcox Finishing Chisel.ng Chisel

  • Residue is chopped, broken and incorporated into soil
  • High speed, low cost ground driven mulching
  • Leveling or planing complements of the soil carrying qualities of reels
  • Both Mechanical and Hydraulic Down Pressure Kits available
  • Better than field cultivator finish from a chisel plow

 

 

 

BACK TO TOP

 

WILCOX Agri-Products, Inc.       14180 Highway 160     PO Box 70     Walnut Grove, CA  95690

PHONE:  916 776-1784     FAX  916 776-1602